Pleiad G3 Comfort
Recessed mounting in unventilated or ventilated ceilings. Separate ballast and installation clip for easy and tool-free installation supplied as standard. A ceiling support must be used when mounting on soft tile ceilings. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.
Connections are made to an independent LED driver. The luminaire is delivered with interconnecting cable.
Luminaire body in black cast aluminium. Visible reflector ring in white PC plastic (RAL 9003).
Reflector in either specular or matt anodised aluminium. Bright metallised Advanced Anti-Glare Control ring above the LED module. Mechanical shielding 45°
The luminaire is supplied with dust protection over the light opening. Enclosure class IP 44 under suspended ceilings and IP 20 above suspended ceilings. Class III applies to the luminaire body only. The supplied driver is class II but should be connected to a functional earth.
For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.
The CRI 90+ version is COI compliant.
N.B. All photometric, spectrometric and electrical data have a tolerance of ±10%.
PLEASE NOTE: When placing an order for this model, please reference both the product code and driver option as per the datasheet.
|Pleiad G3 Comfort | Matt Reflector|
|Pleiad G3 Comfort | Specular Reflector|
|Cover plate Opal IP54, white||41860|
|Cover plate Opal IP54, grey||41864|
|Cover plate Opal IP54, matt aluminium||41868|
|Retrofit Kit 165-255 mm (diameter)||41339|
|Ceiling Support: 600mm||41958|
|Ceiling Support: 625mm||41959|
|Sloping Ceiling Cylinder||41638|
|Tool required for Antiligature Kit||WH-HAL-KEY|
|Driver (Please select one)|